Part way through construction at renewable energy plant in Iowa, it was determined that city wells could not deliver the freshwater volume that the plant would need for operation. The plant faced two options: cease construction or find a secondary water source that would enable the facility to meet their water needs. The city offered a solution, offering to provide the biofuels plant enough reclaimed water [...]
The construction of a new well prompted the need for Seminole County, Florida to address hydrogen sulfide regulations by the Florida Department of Environmental Protection. Struggling with disinfection byproducts resulting from Total Organic Carbon (TOC) and bromide in the water, the county began utilizing ozone oxidation to address the hydrogen sulfide and reduce disinfection by-product through a pilot study. Pilot [...]
The city of St. Martin was in need of a water treatment plant to address iron, manganese and ammonia in the community water supply. The treatment of ammonia using chlorine can be costly and troublesome, while removal through stripping using aeration can be difficult. Biological removal was suggested as a cost saving alternative. A three month pilot study with Tonka Water, a U.S. Water Brand (Tonka Water) was successful [...]
The town of Dell, Arkansas had previously been purchasing water from a neighboring town. The decision was made to drill a new well for the town’s own water treatment plant, utilizing an existing storage building. The town worked together with Tonka Water, a U.S. Water Brand (Tonka Water) to design a new 350 gpm water treatment facility. Tonka Water’s Dualator ® III package treatment unit; which [...]
The City of Miamisburg made the decision to expand their current filtration system to add softening treatment. Tonka Water, a U.S. Water brand (Tonka Water), was the basis of design on the project, having previously worked with the engineer. Tonka Water worked with the engineer to design a new treatment system to best meet the needs of the city. The chosen process for softening is a complete Tonka Water integrated [...]
A methanol manufacturing facility in the Texas Panhandle needed a water treatment plant designed, manufactured, and installed during the construction phase of their operation. The equipment needed to satisfy rigorous water criteria, be modular for plug and play installation, meet Class I Div. II Explosion Proof requirements, and fit into two, customized 53-foot shipping containers. The manufacturing company [...]
Graf Creamery, a Midwestern butter and cream production plant, was experiencing issues with the fat and grease build-up in their holding cell retention pond. The fat build-up was restricting their ability to manage the wastewater leaving the plant and the solids had the potential to fill up the ridge and furrow absorption wastewater process. Due to the fat build-up, they were also losing treatment capacity (maximum [...]
As featured in .
After working with their water treatment vendor for three years, a Southern United States pharmaceutical plant was unable to identify the source of boiler scale and low condensate return rate. The boiler scale and a low return rate were causing increased fuel and operational costs. U.S. Water conducted a plant survey to uncover the boiler system issue. Within a week of the initial plant survey, U.S. Water had [...]
A major Midwestern snack producer had concerns about the high costs of the defoamer product that they were using and were interested in finding an alternative that would be more cost effective. U.S. Water was already a current vendor for the snack producer’s utility water products and services within the plant, and offered assistance in other areas, which included optimizing the foam control needs of the [...]
A protein further processing plant located in midwest United States was concerned with objectionable odors, hydrogen sulfide levels, and poor system efficiency in their wastewater treatment plant. The cause of these issues was found to be a sludge cap on their waste receiving pit and the associated growth of anaerobic bacteria beneath the cap. To remediate this problem, select strains of naturally occurring aerobic [...]
After ten years of inactivity, a midwestern combined cycle power plant needed to bring its water treatment system back into operation. The previous equipment had been sitting idle after the previous owner went bankrupt, and required major cleanup and upgrades. While other water treatment companies were offering a chemical exclusive program, it was evident the plant would require a complete integrated solution to once [...]
Fouling associated with the excessive growth of microorganisms including bacteria, algae, and fungi is a natural, but preventable, issue in most cooling tower systems. As a common problem, facilities have a variety of chemical and mechanical disinfection solutions available when developing a treatment program. A South Dakota industrial manufacturer was combining ozone and a non-oxidizing microbiocide to manage [...]